Woodfinishers Weblog

Wood finishing forum for professional finishers

Back painting glass using the CIC Mustang adhesion promoter

Adhesion promoters are a very useful tool to have in your belt as a finisher, as you will see in this very informative video by master finisher and good friend Thomas Craven, of Thomas Craven studios in Van Nuys California.

Back painting glass is what we are doing here, the other uses for this product are where you have to paint  rubber or plastic, this product was originally designed for painting plastic bumpers  and parts for the automotive industry ( Rubber bumpers on cars, 30 years ago that was a joke). Another use is painting over plastic laminates. I had a customer that bought some very expensive custom cabinet doors from Italy, they were a laminate that had a custom wave C-N-Ced in to the door, the customer made a mistake and got the wrong color,  we used the adhesion promoter on these and fixed the color.

Tom is using the CIC mustang adhesion promoter to back paint glass that is going to be used as a black splash, this is a cool little technique and is very popular. It has high tech ultra modern look and is easy to do, getting the paint to stick to the Glass is the tricky part.

An adhesion promoter is in essence a spray on glue that bonds to the glass and then bonds to your paint and thereby promoting adhesion, Simple Right?    yes and no.

There are a few key application points that Tom goes over in the video that are very Key, two light  (underline) coats. this is not a coating in itself you just want enough to get so stick.

NEXT POINT, you apply  your paint while the adhesion promoter is still tackie. don’t let it dry and then paint over it you have defeated the purpose.

The CIC mustang is a great product as it sprays out very light and doesn’t clump or clog, when looking at the glass you wouldn’t know that there was anything other than the color coat, and guess what you can get that product and other fine CIC products on my web site at http://www.annexpaint.com. if  you have questions you are welcome to write to me at info@annexpaint.com.

and here’s the video:

 

best,

Greg Saunders

 

February 2, 2015 Posted by | Conversion varnish, Spray techniques, Tips and Tricks | , , , , , , | Leave a comment

How you apply lacquer to plastic or glass

Lacquer Plastic and or Glass ?? How would you do that?

Simple, use and adhesion promoter, and what is an adhesion promoter you ask. This is a product that has been around the automotive paint industry for sometime, It has made it’s rise to fame in the auto industry with the advent of the rubber bumper. Painting rubber bumpers is a trick as you need something that is going to stick to the plastic be pliable and then match the paint job on the car.  

 That being said the makers of the water based conversion varnish have come up with and excellent adhesion promoter, called “Mustang” The automotive guys seem to love it and I was of the mind that I wouldn’t have that much use for it but Low and behold I has a custom cabinet shop come to me with a unique problem.

Their customer ordered high end cabinetry from Italy and made a mistake on the color so they need the color changed, OK no problem, good work for some finisher but wait the doors are a thermal foil vinyl coating. What do you do? Yup, Use the Mustang adhesion promoter. 

 Two coats sprayed on from an aerosol can let them dry for a few minutes and the lay on your coatings, in this case I was spraying the centurion water based conversion varnish as you can see in this picture.

the use of adhesion promoters for painting plastic and glass

As you can see there is a profile in the panel making sanding all but impossible despite that the paint stuck like glue.  I built this up with light coats but it only took my three light coats to do what you seen here. I used a 1.7 mm siphon feed gun with about 30 psi of pressure, just enough to get the materials to atomize.

 Once the coating was dried if wouldn’t lift or peel. I was able to scrap it off with a knife and even with that it didn’t peel.

 The Mustang and the Centurion water based conversion coating are available from my store as well as will be available on line at  http://annexpaint.com web site soon.

 Greg Saunders
Annex Paint

July 7, 2010 Posted by | CIC Centurion, water based Conversion Varnish, From the Chemist, Spray techniques, Tips and Tricks, Uncategorized, Water based Lacquers, Wood finishing | , | 3 Comments